IP address – Hostry Help Center https://help.hostry.com Full information on how to use HOSTRY, provided by 24/7 community based support Tue, 30 Nov 2021 17:44:21 +0000 en-US hourly 1 https://wordpress.org/?v=5.9.12 https://help.hostry.com/wp-content/uploads/cache/2021/01/cropped-apple-icon-180x180-1/836712163.png IP address – Hostry Help Center https://help.hostry.com 32 32 Adding an IP address to the Whitelisting https://help.hostry.com/knowledge-base/adding-an-ip-address-to-the-whitelisting/ Fri, 18 Dec 2020 13:06:32 +0000 https://help.hostry.com/?post_type=ht_kb&p=2788 Most Linux based servers use software firewalls such as IPTables and PF. They can be easily configured to restrict web server traffic. This can block one or more StackPath CDN subnets (edge ​​servers), preventing content from being fetched from your source and cached.

In case you own a firewall or other traffic throttling system on the origin server, you need to whitelist the IP addresses of our edge servers. On this page, you will be able to get the IP addresses of the StackPath CDN edge servers that you are configured on.

This link contains

  1. CDN/WAF IP Blocks
  2. CDN Complete iptables list
  3. Monitoring Service IP Addresses

You can also download a list of all blocks in .txt format from the attachment to this article at the bottom of the page.

]]> How Do I Add and Configure Additional IP Address(es) to my VPS on Debian&Ubuntu https://help.hostry.com/knowledge-base/how-do-i-add-and-configure-additional-ip-addresses-to-my-vps-on-debianubuntu/ https://help.hostry.com/knowledge-base/how-do-i-add-and-configure-additional-ip-addresses-to-my-vps-on-debianubuntu/#comments Tue, 11 May 2021 06:59:36 +0000 https://help.hostry.com/?post_type=ht_kb&p=3715 In order to add additional IPv4 for your virtual server, you need to go to your orders page, select the required VPS and then select the “Add.IPs” section.
In this section, you will have an EDIT, by clicking on this you can add a new IPv4 address.

Additional IP price is $ 3

Next, to set up an alternate IP address in Debian and Ubuntu, follow these steps:

Log into your VPS using SSH. As the root user, open the /etc/network/interfaces file in your preferred text editor. Then add the following text to the file:

# The primary network interface
auto eth0:0
iface eth0:0 inet static
address xxx.xxx.xxx.xxx
netmask 255.255.255.0

Next, replace xxx.xxx.xxx.xxx with the new IP address that you want to add to your VPS. Then save the changes in the same /etc/network/interfaces file and then exit your text editor. To restart the network interfaces on your server, you need to run the command:

ifdown -a --exclude = lo; ifup -a --exclude = lo

To verify that the procedure completed successfully, enter the following command:

ifconfig

The new IP address must be associated with interface eth0.

]]> https://help.hostry.com/knowledge-base/how-do-i-add-and-configure-additional-ip-addresses-to-my-vps-on-debianubuntu/feed/ 449