After successfully installing the ssl certificate Let’s Encrypt, you need to download the files located in the “ZIP” folder. This folder must be unpacked. You can order the New SSL Certificate Let’s Encrypt by chicking in the link:  https://hostry.com/solutions/ssl-for-free/

You need to open the folder with the files needed to install the certificate. They need to copy them in a text editor

Then you need to go to the Cpanel Account and enter the “SECURITY” section. In this section you need to find SSL/TLS

Go to this “Install and Manage SSL for Your site (HTTPS)” panel and click on “Manage SSL Sites

Copy each file from your text editor and paste it into the appropriate fields as follows

Next, click on “Install Certificate” after which information will appear in your cPanel that“SSL Host Successfully Installed”

• VPS, with the installed operating system Ubuntu 18.04;
• The static IP address of your vps (primary IP);
• Root access user

Download and Install Ajenti

First you need to add the repo key, it will serve to check the packages that you will install later

wget http://repo.ajenti.org/debian/key -O- | sudo apt-key add -

Then add the real repo to your list of sources.

echo "deb http://repo.ajenti.org/ng/debian main main ubuntu" | sudo tee -a /etc/apt/sources.list

Now update your packages and start the installation

sudo apt-get update && sudo apt-get install ajenti

After the installation is complete, need to start the Ajenti server

sudo service ajenti restart

If you followed the steps above correctly, your console will contain * started

Ajenti Opening

Open Ajenti in your browser by going to https://192.0.2.0:8000. If the browser shows privacy error using this link, then this is completely normal and safe, go to your site.

Next, log in by entering your personal user data

Username: root
Password: admin

Customizing and Configuring Ajenti

Then please Click the Password button in the sidebar. Then enter admin under the old password and select a new, secure password. In the console, restart Ajenti, then log in with the new password

sudo service ajenti restart

Agenti Home – Ajenti Dashboard. It can be configured to display information about your server and uptime. You can further add more widgets by clicking Add Widget at the top

Installation

Update the packages that are installed on your system

yum update -y

Download the installer to the /root directory

cd ~
wget -O installer.sh https://cyberpanel.net/install.sh

Next, restore the permissions and run the installer:

chmod 755 installer.sh
sh installer.sh

If everything went well, you can see the following output:

     CyberPanel Installer v2.0

  1. Install CyberPanel.

  2. Install Addons.

  3. Exit.


Please enter the number[1-3]: 

Type 1 then press ENTER

Further in the console you can see the following:

    CyberPanel Installer v2.0

  RAM check : 71/487MB (14.58%) 

  Disk check : 1/20GB (7%) (Minimal 10GB free space)

  1. Install CyberPanel with OpenLiteSpeed.

  2. Install Cyberpanel with LiteSpeed Enterprise.

  3. Exit.


Please enter the number[1-3]: 

Again, repeat what you did in the previous step, namely: Type 1, and then press ENTER. After that, the installer will automatically prompt you to install MariaDB. Choosing MariaDB 1.0 you stop on it, because it is the only supported version with a panel. Next, you will see the following output: (note that you always need to specify “y“)

Mirror server network is optimized for Asia Pacific region...
If you experience very slow download speed during installation, please try use mirror server on clean system...
Use mirror server [y/N]: y

Replace JS/CSS files to JS Delivr?
This may improve panel loading speed in Asia Pacific region... 
Please select [y/N]: y

Install Memcached extension for PHP?
Please select [y/N]: y      

Install LiteSpeed Memcached?
Please select [y/N]: y

Install Redis extension for PHP?
Please select [y/N]: y

Install Redis?
Please select [y/N]: y

After your yes agreement, CyberPanel will be installed along with its extensions. After which, the installer will display your administrator data:

###################################################################
                CyberPanel Successfully Installed                  

                Current Disk usage : 3/20GB (16%)                        

                Current RAM  usage : 233/487MB (47.84%)                         

                Installation time  : 0 hrs 3 min 24 sec                      

                Visit: https://(YOUR_SERVER_IP):8090                    
                Panel username: admin                              
                Panel password: 1234567                          
                Mysql username: root                               
                Mysql password: iPe2cEiSh7wEn7                       

            Please change your default admin password              

          If you change mysql password, please  modify file in     
         /etc/cyberpanel/mysqlPassword with new password as well   

              Website : https://www.cyberpanel.net                 
              Forums  : https://forums.cyberpanel.net              
              Wikipage: https://docs.cyberpanel.net                

            Enjoy your accelerated Internet by                  
                CyberPanel & OpenLiteSpeed                                       
###################################################################

Configure CyberPanel

Now, you need to go to the setting, it will take a few more moments. Visit your server IP address on the CyberPanel port (YOUR_SERVER_IP): 8090. There you will see the administrator login. Enter your username and password, as described above.

Next, click on the user menu bar next to the name “Cyber ​​Pan”. Selecting “Edit Profile” click on “admin” and on the drop-down menu “Modify User“. Next, successfully change the first name, last name, your password and email address.

• Fresh CentOS vps instance recommended from 2 GB RAM;
• It is necessary that the domain (xxxxx.com) be configured to point to the server;
• Login as super user;
• The fully qualified domain name of the server must be different from its host name. For example, the host name and fully qualified domain name are cwp and cwp.xxxxx.com, respectively.

Install CWP

Download and run the script to install CWP

cd /usr/local/src
wget http://centos-webpanel.com/cwp-el7-latest
sh cwp-el7-latest

The installation process always takes some time, so it’s worth the wait, since the script will automatically install and run all the dependencies, which also include: Apache, PHP, MariaDB and others.

Further, after a successful installation, you can observe the following output:

#############################
#      CWP Installed        #
#############################

go to CentOS WebPanel Admin GUI at http://SERVER_IP:2030/

http://203.0.113.1:2030
SSL: https://203.0.113.1:2031
---------------------
Username: root
Password: ssh server root password
MySQL root Password: Qr71ced05pwr

#########################################################
          CentOS Web Panel MailServer Installer
#########################################################
SSL Cert name (hostname): cwp.example.com
SSL Cert file location /etc/pki/tls/ private|certs
#########################################################

visit for help: www.centos-webpanel.com
Write down login details and press ENTER for server reboot!
Press ENTER for server reboot!

Access CWP from your browser

After restarting your system, you need to specify your web browser directly. Or log in, because CWP will automatically configure firewall rules in order to allow access on ports 2030 and 2031. For security reasons, we recommend that you use this URL:

https://203.0.113.1:2031

Installing Ntopng

A very important point should be followed before installation – adding the official Ntopng repository. To do this, you need to start adding the main dependencies, without which the work of Ntopng will be impossible. Enter the command shown below:

apt install wget gnupg software-properties-common

Then you need to install the Ntopng repository package. Follow the commands shown below:

wget https://packages.ntop.org/apt/20.04/all/apt-ntop.deb
dpkg -i apt-ntop.deb

Next, update the packages:

apt update

This is followed by the completion of adding the official Ntopng repository. You can install it as follows:

apt install pfring-dkms nprobe ntopng n2disk cento

Further Configuring Ntopng on Your VPS

Before proceeding to configuring Ntopng, you need to find your VPS network interfaces. Enter a simple command:

ntopng -h

Ntopng will provide you with network interfaces with the output of the -h command. After that, you need to open the configuration file

nano /etc/ntopng/ntopng.conf

This is followed by a very important step: you need to add the following lines to the very end of the file Line -i = 2 (denotes the initiation for using Ntopng of the second interface enp1s0). Then you should go to the second interface. Leave the web server port 3333 unless you need a different port (the default will be 3333).

Network adapter name
-i=2
HTTP port of the embedded web server.
-w=3333

Next, you should restart your ntopng service

systemctl start ntopng

After that step- is to install it every time you start it in the server boot

systemctl enable ntopng

After successful actions, you should be able to test your ntopng. This can be done as follows (replace 185.186.244.123) with your address and port:

http://185.186.244.123:333

In order to successfully install Plesk on CentOS, you must have the following:

• Installed CentOS x64 Server
• The presence of root user
• Valid Plesk License

Unattended Plesk Installation

First, you need to log in as root user. You need to assign a vps domain name (replace name@example.com with your email address)

hostnamectl set-hostname example.com
sudo sh -c "wget http://installer.plesk.com/plesk-installer -O - | sh /dev/stdin --source http://installer.plesk.com/ --target /tmp/plesk-installation --select-product-id plesk --select-release-latest --installation-type "Typical" --notify-email name@example.com"

This installation takes 7-10 minutes. Please wait until the Plesk installation is complete. Upon completion, you will receive relevant information on the completion of the installation in the console.

Unblock the Plesk admin port

You need to access this panel. To do this, the Plesk Admin Port (8443) must be unblocked using the URL provided upon completion. Please enter the following command:

firewall-cmd --permanent --add-port=8443/tcp
firewall-cmd --reload

You will need to enter this URL and then you will see the administrator’s interface.
After that, you specify the necessary information: login, password, Plesk license key. After that, complete the installation.

Automatic Plesk Installation

First you need to log in as a regular user, with permission to use the sudo command. Then enter the commands below; while assigning the actual domain to your vps to complete the installation. Replace someone@example.com with your existing email address

hostname example.com
sudo sh -c "wget http://installer.plesk.com/plesk-installer -O - | sh /dev/stdin --source http://installer.plesk.com/ --target /tmp/plesk-installation --select-product-id plesk --select-release-latest --installation-type "Typical" --notify-email name@example.com"

This setting takes 8-10 minutes. Upon completion, you will receive a message about this in your console.

Next, enter the URL that will be indicated in this message; when you see the Plesk admin interface, enter the requested information: installation type, login with password, domain name and necessarily Plesk license key. After that, complete the installation!

Automatic Plesk installation

In this step, you need to log in as root user and enter the following command to install Plesk. Replace name@example.com with your actual email address.

hostname example.com
sudo sh -c "wget http://installer.plesk.com/plesk-installer -O - | sh /dev/stdin --source http://installer.plesk.com/ --target /tmp/plesk-installation --select-product-id plesk --select-release-latest --installation-type "Typical" --notify-email name@example.com"

Setting up the script will take about 10 minutes. When finished, you should receive a message on the console that the Plesk installation is complete.

Enter the URL shown in the console in your browser and you will be presented with the Plesk admin interface. Enter the requested information such as installation type, domain name, administrator login / password and Plesk license key to complete the installation.

• Apache + nginx as a web server;
• DNS server;
• Mail server, including setting up DKIM, spam filters and anti-virus;
• Stable version of PHP;
• MySQL 5.5 Database Management System;
• As well as monitoring server load.

The process of installing the panel is very simple and even a novice can do it.

The process of installing

The installation process is very simple: after you purchased the server and received the parameters (IP address and root password), you can install this palette on CentOS, Ubuntu and also Debian using:

curl -O http://vestacp.com/pub/vst-install.sh

bash vst-install.sh

Further, this control panel itself will install all the necessary server applications. It will take some time, so you should wait. After installation, the panel will display a ready-made singal:

Congratulations, you have just successfully installed the Vesta Control Panel

You can login in Vesta with following credentials:
username: admin
password: XXXXXXXX
https://1.2.3.4:8083

It will be necessary to go to the specified URL and the interface of this panel will open to us further: